Tannins in well water: what tea-colored water means and how to remove it
Yellow or brown water that stays tinted overnight usually means tannins. Get tannin, iron, hardness and pH results from a lab before choosing a system.
Tannins are natural organic material from decaying leaves and peat, also called humic or fulvic acid, and they tint well water anywhere from pale yellow to the color of weak tea. The Water Systems Council’s wellcare program says they present no health hazard. The EPA’s secondary standard for color is 15 color units, a guideline for appearance that it does not enforce. Wisconsin DNR treats a shallow well, or a home near wetlands or open water, as a pointer toward tannins when the water turns yellow.
AFWFilters rates the combined tannin filter and softener listed here for hard water with up to 3 ppm of tannins. Above that level, contact AFWFilters or have a water-treatment professional size a system; with iron on the report, send the iron result to the seller before ordering.
AFWFilters rates it for up to 3 ppm of tannins, with 32,000 grains of softening capacity between regenerations. Check your lab results against that first.
| What you see or measure | What it usually means | What to do next |
|---|---|---|
| Brown or yellow as it leaves the tap, still tinted the next morning | Tannins are the likely cause | Order a lab test that includes tannins and iron |
| Color that settles to the bottom overnight | Iron, sometimes with manganese | Start with the iron guide |
| Tannins up to 3 ppm and hard water | Within the listed rating of the unit on this page | Tannin resin and softening resin in one tank |
| Tannins above 3 ppm, or iron on the report | Above the listed tannin rating, or a case the listing does not rate | Above 3 ppm, contact AFWFilters or a water-treatment professional; for iron, send the result to the seller first |
| AFW Filters Tannin Filter and Softener on Amazon, $1,359.00 | ||
| The visual tests are from the Wisconsin Department of Natural Resources and the Water Systems Council. The 3 ppm rating and 32,000 grain capacity are AFWFilters listing figures. Price checked November 1, 2026 on Amazon. | ||
Telling tannins from iron at the sink
Let water run gently into a clear glass or bucket without splashing, then leave it overnight; Wisconsin DNR and the Water Systems Council both describe this check. Iron usually comes out clear and then changes color as it meets air, and its color settles to the bottom. Tannin color shows from the first second and stays mixed through the water.
A lab test still matters because the two can arrive together, and iron pushes a tannin result up. The Water Systems Council says to subtract the iron result from the tannin result to estimate the true tannin level, so check that both are reported in the same units. Hardness belongs on the same order: with soft water, the softening half of a combined unit has little to do, and a tannin-only system is worth asking an installer about.
Tannins can ruin other treatment equipment
Most of the treatment detail on this page comes from the Water Systems Council’s wellcare sheet on tannins. It warns that tannins can coat the media in iron filters, softeners and acid neutralizers until they fail, and says to run the glass check before installing any of them on tinted water. If the report shows tannins together with iron or low pH, show the whole report to whoever sizes the system, and to the seller, before anything is ordered. The acidic well water guide covers the neutralizer side of that decision.
How tannins are treated
The common fix is an anion exchange resin designed to catch organic material. That resin is sensitive to hardness, so the same sheet describes most tannin systems as pairing it with a softener. Our reading, not the sheet’s wording: the fouling warning is aimed at equipment put on tannin water with no tannin stage. Both resins regenerate with salt brine. The softening resin trades hardness for sodium, and UMass Extension advises people on a restricted-salt diet to check with a physician.
The wellcare sheet treats a fishy odor as a sign the tannin resin is fouled and needs cleaning. It also notes that chloride, alkalinity and sulfate can shift after installation, so retest them.
NDSU Extension lists chlorination with a detention tank for tannin color. That is an oxidation approach, which the wellcare sheet calls more complex and best set up by a water-treatment professional. Some wells can avoid treatment altogether: where tannins come from one layer of ground, Wisconsin DNR says changing the casing depth to draw water from above or below that layer may help.
The unit we list
AFW Filters 1.5 cu ft Digital Tannin Filter and Water Softener
Buy the lab test before the system. The well water test kit guide compares options.
Common questions
Are tannins in well water harmful?
No health hazard, according to the Water Systems Council; the concern is appearance and staining. Color says nothing about bacteria or nitrate, so those tests still apply.
Will my existing water softener take out tannins?
Probably not. NDSU Extension notes tannin color can last after softening or filtering, and the Water Systems Council warns that tannins can foul softener resin.
Can changing the well itself fix tannins?
Sometimes, when the tannins come from one layer of ground. Wisconsin DNR says changing the casing depth to draw from above or below that layer may help, and that well changes on a drilled well need a licensed well driller.
Disclosure: this page contains affiliate links, and we may earn a commission if you buy through them, at no extra cost to you. See the editorial policy. Sources: EPA for the color standard; CDC for annual well testing; Wisconsin DNR and NDSU Extension for causes, tests and treatment; the Water Systems Council wellcare program for health, testing and resin systems; UMass Extension for sodium from ion exchange; AFWFilters for the unit’s ratings.