Bacteria in well water: what a coliform result means and what to do next
A positive coliform test means surface water or waste may be reaching your well. Drink bottled water until the well has been disinfected and the follow-up lab tests come back clean.
Coliform bacteria usually live near the ground surface. The Minnesota Department of Health reads a positive result as a sign that surface contamination has found a way into the well. Most coliforms don’t cause disease themselves. Their presence means organisms that do may be in the water too, and an E. coli or fecal coliform result points to human or animal waste, according to the CDC and Penn State Extension.
Penn State Extension’s sequence starts with confirming the result at a certified lab. Next comes repairing the opening that let surface water in, then shock chlorination and a retest, and wells that keep testing positive move on to continuous disinfection. Two tests below cover the checks around those steps: a home coliform screen, and a lab panel that includes the nitrate and arsenic results that decide whether boiling is safe.
| Your result | What it means | What to do |
|---|---|---|
| Total coliform absent | No sign of a contamination pathway on this sample | Test again in a year, and sooner after flooding, well repairs or a change in taste, color or smell |
| Total coliform present, E. coli absent | A possible pathway for surface water; Texas A&M notes the sample may also have been contaminated during collection | Switch to bottled water and resample at a certified lab, asking for E. coli |
| E. coli or fecal coliform present | Human or animal waste is likely reaching the water | Switch to bottled water and call your health department about finding the opening and disinfecting the well |
| Coliform back after shock chlorination | A pathway that disinfection alone did not close | Bring in a licensed well contractor to find the opening the first repair missed, and plan for continuous disinfection if it keeps returning |
| Bacteria plus high nitrate or arsenic | Boiling kills bacteria but concentrates nitrate and arsenic | Use bottled water, not boiled tap water |
| Safe Home DIY Bacteria Test 2-Pack on Amazon, $26.99 Tap Score Advanced Home Water Test on Amazon, $269.00 | ||
| Result meanings and steps are from the CDC, the Minnesota Department of Health, Penn State Extension and Texas A&M AgriLife Extension. Prices checked November 2, 2026 on Amazon. | ||
Drinking water until the well is clear
Use bottled water, or another safe source, for drinking and cooking. If none is available, Penn State Extension says boiling for about one minute kills bacteria, though it treats boiling as an emergency measure, and Texas A&M adds brushing teeth to the uses for boiled water. Check your nitrate and arsenic results before you rely on it: the Minnesota Department of Health warns that boiling concentrates both.
Where the bacteria get in
A damaged casing, a broken or missing well cap and unsealed electrical connections are the openings the Minnesota Department of Health lists first. Septic systems, feedlots and fertilized fields too close to the well add to the risk, and an old well that was never sealed can let contamination straight into the groundwater. MDH puts wells built before 1974, leaking dug wells and wells in old frost pits in its higher-risk group.
Springs and shallow wells test positive far more often than deep ones, Penn State Extension reports. Across all well types, a 2006 survey of 450 private wells that Penn State cites found that about 35 percent had coliform bacteria and about 15 percent had E. coli. Its maintenance list starts above ground: extend the casing above grade, slope the soil away from it, fit a sanitary well cap and check the septic system. Texas A&M suggests at least 50 feet between a septic tank and the well, and 100 feet for drain or spray fields; your state’s own setback rules may differ.
Shock chlorination and the retest
Shock chlorination puts a high concentration of chlorine into the well and plumbing for a short time. A well professional should do it, per Penn State, and the rotten egg smell guide summarizes Wisconsin DNR’s procedure and safety warnings, worth reading before you hire one. Retest 10 to 14 days afterward and again several months later; if both follow-up tests are negative, Penn State says a one-time contamination event is likely.
In a separate Penn State study, shock chlorination plus a new sanitary cap cleared only about 15 percent of positive wells, mostly those with fewer than 10 coliform colonies per 100 mL. When disinfection doesn’t hold, the Minnesota Department of Health points owners to a licensed well contractor, who may need to bail debris out of the well or build a new one.
When the bacteria keep coming back
Penn State Extension sets out what each continuous option needs. Chlorination needs clear water, enough chlorine to leave a residual of about 0.3 to 0.5 mg/L, and roughly 30 minutes of contact time, which may require a larger holding tank. Ultraviolet light adds no chemicals and leaves no residual. UV needs clear water, a clean quartz sleeve and a new bulb about once a year, and it isn’t recommended where total coliform runs above 1,000 colonies per 100 mL or fecal coliform above 100 colonies per 100 mL.
Ohio’s rule shows which UV class to look for. Under Ohio Administrative Code 3701-28-15, only NSF/ANSI 55 Class A units are allowed on Ohio private water systems, the class built to inactivate disease-causing bacteria and viruses, with a filter of 5 microns or finer ahead of the lamp (the sediment guide compares prefilters) and the UV unit placed after any softener or iron equipment. Check the NSF/ANSI 55 class on any UV listing; this page recommends no unit. When checked in October 2026, the listing for the whole-house well system Aquasana sells on Amazon gave its UV stage as Class B, the class meant for water that is already safe.
Kits for the retest and the full panel
Results you act on should come from a certified or accredited laboratory, as the CDC and the Minnesota Department of Health advise, and many health departments can supply a list or run the test themselves.
Safe Home DIY Bacteria Test, 2-Pack
Tap Score Advanced Home Water Test
If the panel also flags iron, manganese or hardness, reading your water test maps each one to a treatment, and the test kit guide compares both kits with a state-certified lab.
Common questions
Will a water softener or cartridge filter remove bacteria?
Not as a bacteria treatment. The continuous options Penn State Extension lists for bacteria are chlorination and UV, and UNL Extension does not generally recommend cartridge filters for microbial contaminants.
How often should a private well be tested for coliform?
At least once a year, per the CDC, plus after flooding, land disturbance or well repairs, and whenever the water’s taste, color or smell changes. The CDC also lists a pregnancy or a new child in the household as reasons to test.
Disclosure: this page contains affiliate links, and we may earn a commission if you buy through them, at no extra cost to you. See the editorial policy. Sources: CDC, Guidelines for Testing Well Water; Minnesota Department of Health, Bacterial Safety of Well Water (updated October 2026); Penn State Extension, Coliform Bacteria (updated September 2025); Texas A&M AgriLife Extension, What to Do About Coliform Bacteria in Well Water (SCSC-PU-146, 2023); Ohio Administrative Code 3701-28-15 and the Ohio Department of Health on UV disinfection; EPA on private wells; Penn State Extension on water softening; UNL Extension on sediment filtration; Safe Home, Tap Score and Aquasana listings for the products.