Arsenic in well water: what your test number means and how it gets treated
Above 10 parts per billion, drink and cook with another source until treatment is in place and a retest confirms it works. A lab test is the only way to know where your well stands, since arsenic has no taste or color.
The EPA’s enforceable limit for public water systems is 10 parts per billion (ppb), the same as 10 micrograms per liter, cut from 50 ppb in 2001. Its health goal is zero, and the Minnesota Department of Health (MDH) says long-term exposure even below the limit can raise cancer risk. Private wells fall outside that rule.
Arsenic comes in two forms, and the arsenic claim some under-sink reverse osmosis units carry covers only one of them. Iron, manganese and pH on the same report decide which media will work, and softeners and carbon filters won’t remove arsenic on their own. That makes a full test the first purchase.
| Your arsenic result | What it means | What to do |
|---|---|---|
| Not detected | Below the lab’s detection level, often 2 ppb (Minnesota’s usual level); arsenic missing from a first sample is unlikely to appear later, per MDH | If your only arsenic test was the one done at drilling, test once more to confirm it, as MDH advises, then keep both reports |
| Detected, 10 ppb or less | Under the federal limit for public systems, though above the EPA’s health goal of zero; MDH sets its action point at 10 ppb | Retest a new well after about six months, since early levels can rise or fall; in an older well, the choice to treat a low reading is yours |
| Above 10 ppb | Over the federal limit for public systems; MDH highly recommends action | Switch drinking and cooking water to another source now, and stay on it until certified treatment is installed and retested |
| Above 200 ppb | The level at which MassDEP says to stop drinking the water immediately, until another source or treatment is in place | Stop drinking it at once, before any retest or treatment quote |
| Above 500 ppb | Bathing and showering are no longer considered safe, per MassDEP and MDH | Use another source for washing too, and call your state health department |
| Tap Score Advanced Home Water Test on Amazon, $269.00 | ||
| Levels are from the EPA, the Minnesota Department of Health (MDH) and the Massachusetts Department of Environmental Protection (MassDEP); 1 ppb equals 1 microgram per liter. Price checked November 2, 2026 on Amazon. | ||
How arsenic gets into a well
Arsenic in rock and soil dissolves into groundwater, and that natural source accounts for most of it; past pesticide use and wood preservatives add some. According to MDH, nobody can predict the level before a well is drilled, and two wells on neighboring lots can test very differently.
A 2017 USGS and CDC study put about 2.1 million people in the lower 48 states on domestic wells above 10 ppb, out of roughly 44 million who use domestic wells. High-arsenic wells can occur in all 48 states the study covered. Maine, New Hampshire, Michigan, Ohio, Arizona and California are among the states it names with the most people affected. In Minnesota, arsenic turned up in about 40 percent of new wells drilled since 2008, about 10 percent of all private wells test above 10 ppb, and a few have reached 350 ppb.
Water for drinking while you decide
Bottled water is the usual stopgap. MDH suggests checking that the brand’s arsenic level is lower than your well’s, because bottled water standards vary. Don’t boil the well water instead, since boiling leaves the arsenic behind and concentrates it.
A well with bacteria and arsenic together gets bottled water for drinking and cooking, even though the usual bacteria advice is to boil. The bacteria guide covers the disinfection side.
Showers, laundry and dishes can go on below 500 ppb, the cutoff both MDH and MassDEP use for household water.
Matching treatment to the test
Ask the lab whether your arsenic is arsenic III or arsenic V; labs can measure each form for an extra fee. MassDEP says arsenic III has to be oxidized to arsenic V first, usually with chlorine, and that reverse osmosis does not remove it effectively. NSF/ANSI 58, the reverse osmosis standard, tests arsenic V (pentavalent arsenic) only, and the claim holds only for water with a free chlorine residual or no arsenic III in it. An under-sink unit on unchlorinated well water can carry that certification and still miss arsenic III.
Under-sink treatment covers drinking and cooking water at one tap. Reverse osmosis handles that job for arsenic V or pre-oxidized water, and adsorptive media, including activated alumina, is the other under-sink option MassDEP lists. Whole-house treatment uses anion exchange, which trades arsenic for chloride, or larger adsorptive media tanks. In a New Hampshire survey MassDEP cites, the median whole-house system cost about two and a half times as much to install as the median under-sink one, before any pre-oxidation step.
MassDEP’s list adds iron and manganese, which cut arsenic treatment’s effectiveness and have to come out first; the iron guide and the manganese guide cover that step. Adsorptive media also depends on pH, and MassDEP notes that some water needs a pH adjustment before it.
Look for certification from an independent body such as NSF International, UL or the Water Quality Association, and check your state’s rules on who may install it. Once the system runs, retest the treated water periodically to confirm it is working.
Getting the arsenic test
An accredited laboratory gives the result to act on, and your county or state health department can point to one. MDH’s advice is one arsenic test beyond the test done when the well was built. For comparing mail-in kits with a lab, see the well water test kit guide.
Tap Score Advanced Home Water Test
Once the report is back, reading your water test maps each of the other results to a treatment.
Common questions
Will my water softener remove arsenic?
No. A softener exchanges hardness, and arsenic needs media rated for it, such as an arsenic-rated anion exchange resin or adsorptive media, so check any basement tank’s certification before counting on it.
Is it safe to shower in water with arsenic?
Below 500 ppb, yes, per MDH and MassDEP. Above that level, use another source for washing as well.
Can I use a pitcher filter while I decide?
Only one certified for arsenic reduction, and only if the claim covers the form of arsenic in your water; activated carbon on its own will not remove it.
Disclosure: this page contains affiliate links, and we may earn a commission if you buy through them, at no extra cost to you. See the editorial policy. Sources: EPA, Chemical Contaminant Rules (Arsenic Rule); Minnesota Department of Health, Arsenic in Well Water (updated October 2026); Massachusetts Department of Environmental Protection, Arsenic in Private Well Water FAQs; USGS, Study Estimates about 2.1 Million People using Wells High in Arsenic (October 18, 2017); NSF, NSF/ANSI 58 Reverse Osmosis Drinking Water Treatment Systems; Water Conditioning & Purification, POU RO Systems and Arsenic Reduction (November 2020), on the standard’s arsenic test; Tap Score listing for the test.